RRS & The Blue Oval Garage RHD 67/68 Mustang Body Shells

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia

It was last year when I posted about RRS having secured the rights to distribute the Dynacorn Fastback body shells here in Australia. Well a few months have passed and they are now available to the public.

RRS have teamed up with The Blue Oval Garage out of Victoria, Australia to distribute the right hand drive shells which are promoted as ‘The world’s first factory built RHD 1967 Mustang”.

The shells are very enticing having been rust-proofed and edp coated for added protection and not to mention the body and panel alignment built to a higher standard than original Ford production vehicle of the 60’s Which one would think would make fitting your Eleanor body kit easier (if that’s what you intend to build).

You can buy the RHD shell for $AUD 32,600, the same price that was originally quoted late last year and for an extra $AUD 9,900 you can have it come with the various body panels such as; Front Stone Guard, Front Valance, Valance to Render Braces pr., Front Fender – RH, Front Fender – LH, Outer Shock Tower RH, Outer Shock Tower LH, Grill & Grill Mouldings, Fibreglass Hood with Steel Black, Headlight buckets and the list goes on.

What I didn’t post about last yeah though was the RRS suspension kit. So here it is in full. Prices are in $AUD

Suspension kit – incl GST

Coil Over Suspension Assy. $3,360
Ph 1 brake package 287mm rotor $685
Ph 2 brake package 297mm rotor $975
Ph 3 brake package 330mm rotor $1,550
Ph 3 with 6 pist. cal. brake package 330mm rotor $2,550
Ph 4 with 6 pist. cal. brake package 345two piece rotor $3,995
Tie Rod adj. sleeves $135
Reinforced Lower Control arms $340
Billet Caps $365
Under-dash booster & master cyl. from: $2,190
Strut Rod adj. kit from… $75
Notching Kit (optional) $290
Strut brace kit from $395
Race Bred Pump kit $700
Rack & Pinion with brackets & internal conversion shaft $2,860
Hydraulic lines high & low pressure $365
Three link rear suspension package incl. 9” diff housing $5,060
Axle small bearing 28 or 31 spline from: $870
Diff Centre/3rd member from: $2,250
Rear disc kit #1 -285mm rotor with park brake adj.from $1,320
Rear disc kit # 2 -315mm rotor with park brake adj.from $1,825

And if money is no object then you can take the whole package:

RRS Right Hand body-shell 67, 68 & 69 Mustang, RRS panel build kit and RRS complete suspension package from…$AUD62,500

I must say though, they do look great, check out the photos below. If I were starting a fresh now I think I would probably go this way! It would save so much money I would think?

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia

RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia RRS Blue Oval 1967 RHD Right Hand Drive Dynacorn Mustang Fastback Body Shells Australia



[Source]

[Source 2]

© 2009 – 2017, 67mustangblog.com. All rights reserved.

Written by 67mustangblog.com